Entel Logo


E-PoC / P1 GW485

Connecting E-PoC & P1 PoC systems to existing radio systems

This all-in-one and easy-to-install, low-cost gateway enables you to significantly extend the range of, or migrate from, existing radio systems. 

Everything you need to know

  • Extend the range and capabilities of almost any radio system (including Capacity Plus / Max, Tetra, P25 etc.)
  • Existing radio systems will benefit from E-PoC's / P1’s  extensive range of software and devices:
    • DN400 Series 4G LTE PoC Radio
    • E-PoC / P1 Smartphone Application - iOS / Android
    • E-PoC / P1 PC Dispatcher 
    • E-PoC / P1 Android Dispatcher
    • E-PoC / P1 Recorder
  • Enables easy and low cost migration from existing radio systems to POC.
  • Scalable to meet the demands of more complex systems. 

Installation in just three easy steps

  1. Power up
  2. Connect to the internet via ethernet or Wi-Fi
  3. Programme Gateway 3.0 over-the-air (OTA) via Entel's secure web portal

In less than 5 minutes, networks are integrated and ready to use.


  • Built in VHF or UHF DMR Tier II / Analogue radio
  • Links DMR Tier II and Analogue radio systems to Entel PoC systems
  • Supports a single Analogue channel / CTCSS & DCS
  • Supports a single DMR / PoC group
  • Supports a single DMR channel & timeslot
  • Over the Internet (OTI) programming & updates - Entel's Gateways can be re-programmed / updated without ever having to visit site saving considerable time and expense as well as delivering a far superior customer support experience
  • Ethernet and WiFi connectivity
  • Entel APK Store support 
  • Auto switch over to WiFi if Ethernet fails - as a fall back to a wired Ethernet network the Gateway can automatically connect to a WiFi network including a simple 4G WiFi hotspot or tethered to a smartphone. 

We are releasing new features all the time, if there is a feature you require that is not already listed above please give us a call.

Youtube Video

DMR / Analogue Radio: General

Channel Capacity 1
Frequency Range UHF 400-470MHz
Analogue Channel Spacing 25KHz / 12.5KHz
Digital Channel Spacing 12.5KHz
Vocoder AMBE+2
Frequency Stability 1.5ppm
Antenna Impedance 50 ohm
Operating Temperature -20° to +55°C
Air Interface (DMR) ETSI TS 102 361

DMR / Analogue Radio: Transmitter

Power Output UHF (High / Mid / Low) 4W / 2W / 1W
Modulation Type 7K60FXE / 7K60FXD, 8K0F3E, 16K0F3E
Distortion 2% / 5% digital / analogue
Unwanted Emission 0.25uW / 1.0uW <1GHz / >1GHz
Adjacent Channel Power -60dBc

DMR / Analogue Radio: Receiver

Digital Sensitivity Typically -121dBm (0.2uV) for 5% BER
Analogue Sensitivity Typically -121dBm (0.2uV) for 12dB Sinad
Rated Audio Output 2 watts
Intermodulation -42dBm
Adjacent Channel Selectivity 60dB (Digital) 60 / 70
(Analogue 12.5KHz / 25KHz)
Spurious Response Rejection -37dBm
Spurious Radiations 2.0nW / 20nW <1GHz / >1GHz


Wireless LAN 802.11 b/g/n
Operating Voltage 12VDC / 100 - 240VAC 50 / 60Hz
Overall Dimensions (HxWxD) 45mm x 275mm x 178mm
Weight 1.8Kg

Model Selection Filter

Accessory Type

  • No Products
Loading Products

Related Products