E-PoC / P1 GW425
Connecting E-PoC & P1 PoC systems to existing radio systems
This all-in-one and easy-to-install, low-cost gateway enables you to significantly extend the range of, or migrate from, existing radio systems.
Everything you need to know
- Extend the range and capabilities of almost any radio system (including Capacity Plus / Max, Tetra, P25 etc.)
- Existing radio systems will benefit from E-PoC's / P1’s extensive range of software and devices:
- DN400 Series 4G LTE PoC Radio
- E-PoC / P1 Smartphone Application - iOS / Android
- E-PoC / P1 PC Dispatcher
- E-PoC / P1 Android Dispatcher
- E-PoC / P1 Recorder
- Enables easy and low cost migration from existing radio systems to POC.
- Scalable to meet the demands of more complex systems.
Installation in just three easy steps
- Power up
- Connect to the internet via ethernet or Wi-Fi
- Programme Gateway 3.0 over-the-air (OTA) via Entel's secure web portal
In less than 5 minutes, networks are integrated and ready to use.
KEY FEATURES
- Built in VHF or UHF DMR Tier II / Analogue radio
- Links DMR Tier II and Analogue radio systems to Entel PoC systems
- Supports a single Analogue channel / CTCSS & DCS
- Supports a single DMR / PoC group
- Supports a single DMR channel & timeslot
- Over the Internet (OTI) programming & updates - Entel's Gateways can be re-programmed / updated without ever having to visit site saving considerable time and expense as well as delivering a far superior customer support experience
- Ethernet and WiFi connectivity
- Entel APK Store support
IN DEVEVLOPMENT
- Firewall port checker
- Auto switch over to WiFi if Ethernet fails
- DMR Tier II / PoC emergency signalling cross networks
- DMR Tier II / PoC multiple group calls cross networks
- DMR Tier II / PoC two slot
- DMR Tier II / PoC Caller ID cross networks
- DMR Tier II / PoC individual calls cross network
- DMR Tier II / PoC GPS cross networks
- PSTN interface
- Send message from BMS, Intruder or Fire alarm panel etc. (to DMR / PoC radios)
If you require a feature not listed above please let us know.
Auto switch over to WiFi if Ethernet fails - as a fall back to a wired Ethernet network the Gateway can automatically connect to a WiFi network including a simple 4G WiFi hotspot or tethered to a smartphone.
Firewall port checker - When the gateway is connected to a firewalled network you can use its port checker feature to easily identify if any ports need opening for the gateway to function correctly.*
DMR Tier II / PoC emergency signalling cross networks - this enables a DMR emergency to be received on a DN radios & vice versa.*
DMR Tier II / PoC multiple group calls cross networks - this enables multiple DMR groups to be mapped to DN radio groups & vice versa.*
DMR Tier II / PoC two slot - this enables both DMR slots to be mapped to DN radio groups & vice versa.*
DMR Tier II / PoC Caller ID cross networks - this enables DMR caller ID's to be sent to DN radio & vice versa.*
DMR Tier II / PoC individual calls cross networks - this enables DMR individual calls to DN radios and vice versa.*
DMR Tier II / PoC GPS cross networks - this enables sharing of GPS date between DMR networks and E-PoC networks enabling the use of a DMR or E-PoC dispatcher with location mapping.*
PSTN interface - this will enable you to use your Gateway 3.0 as a full-duplex (from DN radio) telephone interconnect unit (half-duplex from a DMR or analogue radio).*
Alarm Monitoring - Send message from BMS, Intruder or Fire alarm panel etc. (to DMR / PoC radios)*
* On roadmap for development
DMR / Analogue Radio: General
Channel Capacity | 1 |
Frequency Range | VHF: 136 - 174MHz |
Analogue Channel Spacing | 25KHz / 12.5KHz |
Digital Channel Spacing | 12.5KHz |
Vocoder | AMBE+2 |
Frequency Stability | 1.5ppm |
Antenna Impedance | 50 ohm |
Operating Temperature | -20° to +55°C |
Air Interface (DMR) | ETSI TS 102 361 |
DMR / Analogue Radio: Transmitter
Power Output VHF (High / Mid / Low) | 5W / 2W / 1 W |
Modulation Type | 7K60FXE / 7K60FXD, 8K0F3E, 16K0F3E |
Distortion | 2% / 5% digital / analogue |
Unwanted Emission | 0.25uW / 1.0uW <1GHz / >1GHz |
Adjacent Channel Power | -60dBc |
DMR / Analogue Radio: Receiver
Digital Sensitivity | Typically -121dBm (0.2uV) for 5% BER |
Analogue Sensitivity | Typically -121dBm (0.2uV) for 12dB Sinad |
Rated Audio Output | 2 watts |
Intermodulation | -42dBm |
Adjacent Channel Selectivity | 60dB (Digital) 60 / 70 (Analogue 12.5KHz / 25KHz) |
Spurious Response Rejection | -37dBm |
Spurious Radiations | 2.0nW / 20nW <1GHz / >1GHz |
General
Wired LAN | RTL GB LAN |
Wireless LAN | 802.11 b/g/n |
Operating Voltage | 12VDC / 100 - 240VAC 50 / 60Hz |
Overall Dimensions (HxWxD) | 45mm x 275mm x 178mm |
Weight | 1.8Kg |
Featured Products
- No Products
